IBS Flood Doors & Gates (single- and double-leaf)
IBS flood-defence doors provide a fast and cost-effective way to secure entrances that are likely to be affected by flooding. The doors are installed in front of the wall, on the side subject to pressure.
The profile seal, which runs around the edge of the door, is secured to the door leaf by a stainless-steel clamping strip.
Movable structural elements (hinges, screws, etc.) are normally made of stainless steel. The frame, door leaf and door reinforcement can be supplied in stainless steel, hot-dip galvanised or coated black steel.
Single-leaf flood-defence doors are supplied in standard dimensions of up to 2.5 x 2.5 metres, configured for a water column of 4 metres above the threshold.
Our various types
FDTS-L/R or FGTS-L/R
Flood-defence doors/gates on pressure side with threshold (Semi-finished construction)
FDTE-L/R or FGTE-L/R
Flood-defence doors/gates on pressure side without threshold (Semi-finished construction)
FDDS-L/R or FGDS-L/R
Flood-defence doors/gates on pressure side with threshold (edge construction)
FDDE-L/R or FGDE-L/R
Flood-defence doors/gates on pressure side without threshold (edge construction)
FDZE-L/R or FDZE-L/R
Flood-defence doors/gates, pull-type, without threshold (edge construction)
FGRS-L/R (50 and 100)
Single-leaf flood-defence gate on pressure side, with threshold (aluminium)
FGRE-L/R (50 and 100)
Single-leaf flood-defence gate on pressure side, without threshold (aluminium)
FGRE-L/R-2x100
Two-leaf flood-defence gate, on pressure side, without threshold (aluminium)
Our Material cobinations
Material combination 1 (all doors and gates)
Material of frame, fittings, threshold: 1.4301
Material of leaf: Black steel S235, primer-coated
Material combination 2 (all doors and gates)
Material of frame, fittings, threshold: 1.4404
Material of leaf: Black steel S235, primer-coated
Material combination 3 (all doors and gates)
Material of frame, fittings, threshold: 1.4301
Material of leaf: Black steel S235, wet-paint coated
Material combination 4 (all doors and gates)
Material of frame, fittings, threshold: 1.4404
Material of leaf: Black steel S235, wet-paint coated
Material combination 5 (without FGTS, FGTE, FDTS or FDTE)
Material of frame, fittings, threshold, leaf: 1.4301
Material combination 6 (without FGTS, FGTE, FDTS or FDTE)
Material of frame, fittings, threshold, leaf: 1.4404
Material combination 7 (FGTS, FGTE, FDTS and FDTE only)
Material of frame, fittings, threshold: 1.4301
Material of leaf: Black steel S235, wet-paint coated, hot-dip galvanised
If you are interessted in more Information about Flood Doors & Gates please contact us.
